Ip Bootp-Dhcp Server - Avaya G250 Reference

Example
To enable relaying of BOOTP and DHCP requests:
G350-001(super)# ip bootp-dhcp relay
To disable relaying of BOOTP and DHCP requests:
G350-001(super)# no ip bootp-dhcp relay
Related commands
ip bootp-dhcp network,

ip bootp-dhcp server

Use the ip bootp-dhcp server command to add a BOOTP/DHCP server to handle
BOOTP/DHCP requests received by this interface. A maximum of two servers can be added to
a single interface. Use the no form of this command to remove a server.
Syntax
[no] ip bootp-dhcp server ip_address
Parameters
Parameter
ip_address
User level
read-write
Context
Interface: FastEthernet (L2-L3, L2), VLAN (L2-L3, L2)
Example
To add station 192.168.37.46 as a BOOTP/DHCP server to handle BOOTP/DHCP requests:
G350-001(if:Vlan 1.2)# ip bootp-dhcp server 192.168.37.46
Related commands
ip bootp-dhcp network,
ip bootp-dhcp server
Description
The IP address of the server
ip bootp-dhcp relay
Alphabetical listing of CLI commands
Possible
Values
Issue 1.1 June 2005
Default
Value
227