CLI Commands
show port vlan-binding-mode
Use the show port-vlan-binding command to display port VLAN binding mode
information. If no module number is specified, information for all ports on all modules is
displayed. If no port number is specified, information for all ports on the specified module is
displayed.
Syntax
show port vlan-binding-mode [module[/port]]
Parameters
Parameter
module
port
User level
read-only
Context
general
Example
To display VLAN binding information for all ports:
G350-001(super)# show port vlan-binding-mode
port 2/1 is statically bound
port 2/2 is statically bound
port 2/3 is statically bound
port 2/4 is statically bound
port 2/5 is statically bound
port 2/6 is statically bound
port 2/7 is statically bound
port 2/8 is statically bound
port 2/9 is statically bound
port 2/10 is statically bound
674 Avaya G250 and Avaya G350 CLI Reference
Description
The number of the module
The number of the port on the module. You can
also specify a range of ports, for example,
4/5-13 for ports 5 to 13 on module 4.
Possible
Default
Values
Value