Set Ars-Fac - Avaya G250 Reference

set ars-fac

Use the set ars-fac command to configure up to two Automatic Route Selection (ARS)
Feature Access Codes (FACs) in the SLS data on the G250. ARS FACs must be unique from
any extension or Trunk Access Code (TAC).
Note:
This command is supported by the Avaya G250-Analog; it is not supported on the
Note:
G250-BRI or the G350.
Syntax
set ars-fac fac
Parameters
Parameter
fac
User level
read-write
Context
You must be in the survivable-call-engine context before the set ars-fac command will work.
Example
G250-001(super-survivable-call-engine)# set ars-fac #
Fac: #9
Related commands
add trunk-group,
trunk-group, remove
set extension-password,
set trunk-group,
ip-codec-set, show
show trunk-group,
Description
The FAC
clear ars-fac, clear survivable-config,
trunk-group, save
set ip-codec-set,
show ars-fac, show date-format,
last-pim-update, show
survivable-call-engine
Alphabetical listing of CLI commands
Possible Values
1-4 digits, which can include * or
# as the first digit
clear dial-pattern,
config, set date-format,
set max-ip-registrations,
show dial-pattern,
max-ip-registrations,
clear extension,
set dial-pattern, set extension,
set survivable-call-engine,
show extension,
show survivable-call-engine,
Issue 1.1 June 2005
clear
show
393