CLI Commands
show frame-relay map
Use the show frame-relay map command to display a summary table of Frame Relay
sub-interfaces and DLCIs associated with the sub-interfaces.
Syntax
show frame-relay map
User level
read-only
Context
general
Example
To display information about the Frame Relay sub-interfaces:
G350-001(super)# show frame-relay map
Showing 2 frame-relay map entries
Interface StateInterface Type DLCI DLCI Type DLCI State
----------- ------ -------------- ---- --------- ------
Serial 1.1 downpoint-to-point
Serial 1.1 down point-to-point
Related commands
clear frame-relay
frame-relay pvc
show frame-relay pvc
Use the show frame-relay pvc command to display detailed PVC information. The
information can be shown for all PVCs known to the device, for all PVCs learned on an
interface, or for a specific PVC (DLCI). Note that in this case, all PVCs with the same DLCI are
displayed. When statistics for multiple PVCs are shown, they are sorted first by interface type
and number, and then by DLCI.
Syntax
show frame-relay pvc [interface interface_name | dlci_number]
564 Avaya G250 and Avaya G350 CLI Reference
counters,
frame-relay
brief,
show interfaces
17 broadcast deleted
18 broadcast deleted
class-dlci,
interface
serial,
map-class
frame-relay,
show