Set Extension - Avaya G250 Reference

Cli reference

Hide thumbs Also See for G250:

Table of Contents

CLI Commands

set extension

Use the set extension command to administer extension parameters in the SLS data in the

G250. To assign a password to the extension, use the

must assign a password to the extension if the port is ip.

This command is supported by the Avaya G250-Analog; it is not supported on the

G250-BRI or the G350.

set extension extension type port cor trunk-dest

408 Avaya G250 and Avaya G350 CLI Reference

The extension number

Station type

Module and port location. If the port

is ip, you must assign a password

set extension-password

Class of restriction

Permit or deny the call

set extension-password

G250-BRI (for

future release):

v302, v303, or

unrestricted

command. You