Loopback Remote - Avaya G250 Reference

Parameters
Parameter
loopback_type
User level
read-write
Context
Interface: Controller
Example
To activate a loopback signal with payload information:
G350-001(if:Serial 5/1)# loopback local payload
Related commands
loopback diag,

loopback remote

Use the loopback remote command to request a remote station to activate a Loopback
signal on the Serial interface. Use the no form of the command to deactivate the Loopback
signal.
Syntax
loopback remote loopback_type
no loopback remote
Parameters
Parameter
loopback_type
Description
The type of information to loop back
loopback remote
Description
The type of information to loop back
Alphabetical listing of CLI commands
Possible
Values
line,
payload
Possible
Values
line,
payload
Issue 1.1 June 2005
Default
Value
Default
Value
325