User level
read-write
Context
general
Example
G350-001(super)# copy scp startup-config c:\config_files\router1.cfg
192.168.49.10
copy startup-config ftp
Use the copy startup-config ftp command to upload the current configuration to a file
on an FTP server. The command prompts for the username and password. Uncommitted
changes to the configuration are not included.
Note:
After you change the configuration, run the copy running-config
Note:
startup-config command to save the changes. If you do not save the
changes, the device loses the changes when you reset it.
Syntax
copy startup-config ftp filename ip
Parameters
Parameter
filename
ip
User level
read-write
Context
general
Example
To upload the current configuration to the g350.cfg file on the FTP server at IP address
135.64.10.33:
G350-001(super)# copy startup-config ftp g350.cfg 135.64.10.33
Description
Name of file to create on the FTP server
IP address of the FTP server
Alphabetical listing of CLI commands
Possible
Default
Values
Value
Issue 1.1 June 2005
125