Related commands - VLAN configuration
clear port
static-vlan,
vlan-binding-mode,
trunk,
show vlan
interface-keepalive bypass-logic
The interface-keepalive bypass-logic command provides future support of an
alternative internal path for RTR probes, in cases where next-hop is configured for the RTR
probes.
Note:
This command is automatically appended to the configuration if you specify
Note:
next-hop for the RTR probes using the
This command is automatically removed from the configuration when specifying
no next-hop.
Syntax
interface-keepalive bypass-logic
User level
read-write
Context
rtr type
Related commands
dscp (object
tracking), fail-retries, frequency,
success-retries, type,
invert txclock
Use the invert txclock command to invert the transmit clock signal from the data
communications equipment (DCE). Use the no form of the command to restore the signal to not
inverted.
Syntax
[no] invert txclock
clear
vlan, icc-vlan,
set
trunk,
set
vlan,
show cam
wait-interval
Alphabetical listing of CLI commands
set port
static-vlan,
set port
vlan,
show port
next-hop (object tracking)
next-hop (object
tracking), rtr, source-address,
vlan,
set port
vlan-binding-mode,
show
command.
Issue 1.1 June 2005
219