Area - Avaya G250 Reference

CLI Commands
extension-password,
trunk-group, show
show ip-codec-set,
survivable-call-engine,

area

Use the area command to configure the area ID of a router. Use the no form of the command
to delete the area ID.
Syntax
[no] area area_id [stub]
Parameters
User level
read-write
Context
Router OSPF
Example
To configure an area for this OSPF interface with IP address 192.168.49.1:
G350-001(router:ospf)# area 192.168.49.1
To configure a stub area for this OSPF interface with IP address 176.1.13.12:
G350-001(router:ospf)# area 176.1.13.12 stub
To remove the area with IP address 192.168.49.1:
G350-001(router:ospf)# no area 192.168.49.1
Related commands
default-metric
38 Avaya G250 and Avaya G350 CLI Reference
set ip-codec-set,
ars-fac, show date-format,
show last-pim-update,
show trunk-group,
Parameter Description
The IP address
area_id
Configure a stub area
stub
(OSPF), network (OSPF), passive-interface,
set max-ip-registrations,
show dial-pattern,
show max-ip-registrations,
survivable-call-engine
Possible
Values
redistribute
set survivable-call-engine,
show extension,
show
Default
Value
(OSPF), timers spf
set