Show Self-Test-Status - Avaya G250 Reference

Alphabetical listing of CLI commands
!
ds-mode t1
!
interface Vlan 1
icc-vlan
ip address 172.16.1.139 255.255.255.240
pmi
!
interface FastEthernet 10/2
!
interface Console
ip address 10.3.0.1 255.255.255.0
!
Related commands - Configuration files
copy ftp startup-config, copy running-config ftp, copy running-config scp, copy running-config
startup-config, copy running-config tftp, copy startup-config ftp, copy startup-config scp, copy
startup-config tftp, copy tftp startup-config, erase startup-config, nvram initialize, show copy
status, show download status, show erase status, show logging file condition, show
startup-config

show self-test-status

Use the show self-test-status command to display the results of the power-up self test
sequence.
Syntax
show self-test-status
User level
read-only
Context
general
Example
G350-001(super)# show self-test-status
Device successfully passed the power-up self test sequence.
Related commands
enhanced security, show system, zeroize
Issue 1.1 June 2005 701