Set Mgc List - Avaya G250 Reference

CLI Commands

set mgc list

Use the set mgc list command to permit the creation of a list of valid Media Gateway
Controller(s). The user can configure up to four IP addresses separated by commas.
Note:
The set mgc list command appends the new controllers to the existing list of
Note:
controllers, if any.
Syntax
set mgc list {ipaddress1,...}
Parameters
Parameter
ipaddress1
User level
read-write
Context
general
Example
To specify two Media Gateway Controllers at IP addresses 132.236.73.2 and 119.52.3.27:
G350-001(super)# set mgc list 132.236.73.2, 119.52.3.27
Related commands
clear mgc list, session,
icc-monitoring,
428 Avaya G250 and Avaya G350 CLI Reference
Description
The IP address of the call controller
set icc-monitoring,
show mediaserver, show
set mediaserver, set
mgc, show mgc list
Possible Default
Values Value
reset-times, show