Remove Trunk-Group - Avaya G250 Reference

CLI Commands

remove trunk-group

Use the remove trunk-group command to remove a port from a trunk group in the SLS data
set on the G250. The port must belong to a trunk group before you can remove it.
Note:
This command is supported by the Avaya G250-Analog; it is not supported on the
Note:
G250-BRI or the G350.
Syntax
remove trunk-group tgnum port
Parameters
Parameter
tgnum
port
User level
read-write
Context
You must be in the survivable-call-engine context before the remove trunk-group command
will work.
Example
G250-001(super-survivable-call-engine)# remove trunk-group 13 v301
Port v301 was removed from Trunk Group 13.
Related commands
add trunk-group,
trunk-group, save
extension-password,
trunk-group, show
ip-codec-set, show
show trunk-group,
366 Avaya G250 and Avaya G350 CLI Reference
Description
Specifies the trunk group to delete
Port address of the trunk group
clear ars-fac, clear survivable-config,
config, set ars-fac, set
set ip-codec-set, set
ars-fac, show date-format,
last-pim-update, show
survivable-call-engine
clear dial-pattern,
date-format, set dial-pattern,
max-ip-registrations,
show dial-pattern,
max-ip-registrations,
Possible Default
Values Value
1-2000
clear extension,
set extension, set
set survivable-call-engine,
show extension, show
show survivable-call-engine,
clear
set