Set Extension-Password - Avaya G250 Reference

Context
You must be in the survivable-call-engine context before the set extension command will
work.
Example
G250-001(super-survivable-call-engine)# set extension 49879 analog2500
v305 local y sunny
Extension:
Type: analog2500
Slot: v3
Port: 05
Cor: local
Trunk-dest:
Related commands
add trunk-group,
trunk-group, remove
extension-password,
trunk-group, show
ip-codec-set, show
show trunk-group,

set extension-password

Use the set extension-password command to set passwords for IP endpoints. If the port is ip,
you must assign a password.
Note:
This command is supported by the Avaya G250-Analog; it is not supported on the
Note:
G250-BRI or the G350.
Syntax
set extension-password extension password
Parameters
Parameter
extension
password
49879
y
clear ars-fac, clear survivable-config,
trunk-group, save
set ip-codec-set,
ars-fac, show date-format,
last-pim-update, show
survivable-call-engine
Description
The extension number
The IP endpoint's password
Alphabetical listing of CLI commands
clear
config, set ars-fac, set
set max-ip-registrations,
show dial-pattern,
max-ip-registrations,
dial-pattern, clear extension,
date-format, set dial-pattern,
set survivable-call-engine,
show extension, show
show survivable-call-engine,
Possible Default
Values Value
1-7 digits
4-8 digits
Issue 1.1 June 2005
clear
set
set
409