Ip Netmask-Format - Avaya G250 Reference

ip netmask-format

Use the ip netmask-format command to specify the format of netmasks in the show
command output. Use the no form of this command to restore the format to the default format.
Syntax
ip netmask-format mask_format
no ip netmask-format
Parameters
Parameter
mask_format
User level
read-write
Context
general
Example
To display netmasks in bitcount format:
G350-001(super)# ip netmask-format bitcount
Description Possible Values
The format of bitcount - Addresses are followed by
the netmasks a slash and the total number of bits in
the netmask, such as 17.
decimal - The network masks are in
dotted decimal notation, such as
255.255.255.0.
hexadecimal - The network masks
are in hexadecimal format as
indicated by the leading 0X, such as
0XFFFFFF00.
Alphabetical listing of CLI commands
Issue 1.1 June 2005
Default
Value
decimal
255