Keepalive-Track - Avaya G250 Reference

CLI Commands

keepalive-track

Use the keepalive-track command to bind an object tracker to a remote VPN peer or to an
interface, to check whether the remote peer or the interface is up. Use the no form of this
command to disable this mechanism (default setting).
Note:
When configuring VPN, you can use the keepalive-track command instead
Note:
of the keepalive command when the remote peer does not support DPD, or
when you want to monitor servers behind the VPN remote peer.
Note:
You cannot configure both keepalive-track and ip address dhcp (DHCP
Note:
Client) on the WAN Fast Ethernet interface.
Syntax
keepalive-track track-id
no keepalive-track
Parameters
Parameter
track-id
User level
read-write
Context
Interface: FastEthernet
crypto isakmp peer
Example
To register a remote VPN peer with an object tracker:
G350-001(config-peer:149.49.70.1)# keepalive-track 5
To register the FastEthernet interface with an object tracker:
G350-001(config-if:FastEthernet 10/2)# keepalive-track 2
314 Avaya G250 and Avaya G350 CLI Reference
Description
The ID of the object tracker.
Possible Default
Values Value
1-100