Set Spantree Default-Path-Cost - Avaya G250 Reference

Related commands - Dynamic trap manager
snmp-server dynamic-trap-manager

set spantree default-path-cost

Use the set spantree default-path-cost command to set the version of the spanning
tree default path cost used by this bridge.
Note:
This command is not supported by the G250.
Note:
Syntax
set spantree default-path-cost pathcost
Parameters
Parameter
pathcost
User level
read-write
Context
general
Example
To use the rapid-spanning-tree default path cost:
G350-001(super)# set spantree default-path-cost rapid-spanning-tree
Spanning tree default path costs is set to rapid spanning tree.
Related commands
set port spantree,
spantree priority,
hello-time, set spantree
version, show spantree
Description
The version of the
spanning tree default
path cost
set port spantree cost,
set spantree enable/disable,
max-age, set spantree
Alphabetical listing of CLI commands
Possible Values
common-spanning-tree -
compatible with IEEE802.1D
standard
rapid-spanning-tree -
compatible with IEEE802.1W
standard
set port spantree force-protocol-migration,
set spantree forward-delay,
priority, set spantree
Default Value
set port
set spantree
tx-hold-count, set spantree
Issue 1.1 June 2005 489