Speed (Ppp) - Avaya G250 Reference

Related commands - Policy
composite-operation, destination-ip,
show composite-operation,
tcp source-port,
Related commands - VPN
description (ip rule), destination-ip,
map, show ip crypto-list

speed (PPP)

Use the speed command to set the PPP baud rate to be used by asynchronous PPP ports.
Note:
The peer baud-rate must be set to the same value.
Note:
Syntax
speed speed_rate
Parameters
Parameter
speed_rate
User level
read-write
Context
Interface: Console, USB
Example
To set the PPP baud rate to 9600:
G350-001(if:CON)# speed 9600
Related commands
async mode interactive,
authentication,
dscp (policy, policy-based routing, packet
show dscp-table,
udp destination-port,
ip
Description
The PPP baud rate
async mode
shutdown (interface),
show ip-rule,
udp source-port
crypto-list, ip-rule (VPN), local-address,
terminal, async modem-type,
shutdown (USB modem),
Alphabetical listing of CLI commands
sniffing), icmp,
tcp destination-port, tcp
protect crypto
Possible
Values
9600,
19200,
38400
ip address, ppp
timeout absolute
Issue 1.1 June 2005
established,
Default
Value
38400
755