Show Controllers Remote - Avaya G250 Reference

Related commands - E1/T1 interfaces
cablelength long,
interface serial,
Related commands - Verifying WAN configuration
show frame-relay
traffic, show interfaces,

show controllers remote

Use the show controllers remote command to display controller statistics from a peer
station. If the Facility Data Link (FDL) for this controller is set to att, the system displays the
status (up or down) of the line. Otherwise, the system displays statistics for the controller. To set
the Facility Data Link, refer to
Syntax
show controllers remote module/port fdl_data_type
Parameters
Parameter
module
port
fdl_data_
type
User level
read-write
Context
general
Example
To display 1h-data statistics for the T1 controller on port 1 of module 5:
G350-001(super)# show controllers remote 5/1 1h-data
cablelength short, channel-group,
ip address, linecode (E1),
fragment, show frame-relay
show ip interface,
fdl on page 189.
Description
The module number
The port number
The type of statistics to
display
Alphabetical listing of CLI commands
clock source, controller, ds-mode, framing,
linecode (T1), remote
lmi, show frame-relay
show map-class frame-relay
Possible Values
1h-data,
errored-esf-data,
enhanced-1h,
enhanced-c1-configuration
pvc, show frame-relay
Default
Value
Issue 1.1 June 2005 525