Source-Ip - Avaya G250 Reference

CLI Commands

source-ip

Use the source-ip command to indicate that the current rule applies to packets from the
specified source IP address. Use the no form of the command to indicate that the current rule
applies to all packets except those coming from the specified IP address.
Syntax
[no] source-ip {host ip_address | any | ip_address wildcard}
Parameters
Parameter
host
ip_address
any
wildcard
User level
read-write
Context
ip pbr-list ip-rule, ip qos-list ip-rule, ip capture-list ip-rule, ip access-control-list ip-rule, ip
crypto-list ip-rule
Example
To specify that rule 22 of QoS policy list 460 applies to any packet coming from IP address
135.64.104.102:
G350-110(QoS 460/rule 22)# source-ip host 135.64.104.102
Related commands - Policy-based routing
destination-ip,
capture-list, tcp
754 Avaya G250 and Avaya G350 CLI Reference
Description
Keyword that indicates a specific host IP
address
The IP address of packets to which the rule
is applied
Keyword that indicates any IP address
A range of IP addresses
dscp (policy, policy-based routing, packet
destination-port, tcp
sniffing), icmp, ip-protocol,
source-port, udp destination-port,
Possible Default
Values Value
show ip
udp source-port