Set Transform-Set - Avaya G250 Reference

CLI Commands
User level
admin
Context
general
Example
To disable the recovery password:
G350-001(super)# set terminal recovery password disable

set transform-set

A crypto map object points to a single transform-set object, which contains the parameters
required for IKE Phase 2 negotiation.
Use the set transform-set command to configure the transform-set. Use the no form of
the command to remove the transform-set from the crypto map.
Note:
You cannot remove a transform-set from a crypto map that is being used by an
Note:
active crypto-list. You must first de-activate the crypto-list, using the no form of
the ip crypto-group command. See
Syntax
[no] set transform-set name
Parameters
Parameter
name
User level
read-write
Context
crypto map
504 Avaya G250 and Avaya G350 CLI Reference
Description
The name of the transfer set
ip crypto-group on page 229.
Possible Values
1-32 characters
Default
Value