Show Snmp Timeout - Avaya G250 Reference

CLI Commands

show snmp timeout

Use the show snmp timeout command to display the time to wait before resending a
communication.
Note:
This command is not supported by the G250.
Note:
Syntax
show snmp timeout
User level
read-only
Context
general
Example
To display the timeout value:
G350-001(super)# show snmp timeout
the SNMP Timeout is 60
Related commands - SNMP access configuration
ip snmp-server,
snmp, show snmp
snmp user summary,
snmp-server engineID,
snmp-server view
Related commands - SNMP trap configuration
clear snmp trap,
enable notifications,
706 Avaya G250 and Avaya G350 CLI Reference
set snmp community,
engineID, show snmp
show snmp usertogroup,
snmp-server group,
set port trap, set snmp
snmp-server host,
set snmp retries, set snmp
group, show snmp
show snmp view,
snmp-server remote-user,
trap, show snmp, snmp trap
snmp-server informs
timeout, show port
retries, show snmp user,
snmp-server community,
snmp-server
link-status, snmp-server
trap, show
show
user,