Set Etr - Avaya G250 Reference

set etr

Use the set etr command to enable or disable Emergency Transfer Relay (ETR) mode, or to
allow the gateway to control ETR mode automatically.
Note:
In ETR mode, the TRK and LINE 1 ports are connected. All other telephone ports
Note:
stop operating.
Note:
If a call is in progress when the communications problem ends, the gateway does
Note:
not turn off ETR mode automatically. If you specify manual-off, the call
terminates.
Syntax
set etr module {auto | manual-on | manual-off}
Parameters
Parameter
module
auto
manual-on
manual-off
User level
read-write
Context
general
Example
To specify that the gateway will control ETR mode automatically on module 7:
G350-001(super)# set etr 7 auto
Related commands
show etr
Description
Module number
Allow the gateway to control ETR mode
automatically
Set ETR mode to on
Set ETR mode to off
Alphabetical listing of CLI commands
Possible
Values
1-7
Issue 1.1 June 2005
Default
Value
407