CLI Commands
dscp-table
Use the dscp-table command to enter the DSCP table entry context for a particular DSCP
value for the current QoS list. If the specified DSCP table entry does not exist, the system
creates it.
Syntax
dscp-table dscp_value
Parameters
Parameter
dscp_value
User level
read-write
Context
ip qos-list, capture-list
Example
To enter configuration mode for DSCP table entry 21:
G350-001(QoS 440)# dscp-table 21
Related commands
composite-operation, cookie,
composite-operation,
176 Avaya G250 and Avaya G350 CLI Reference
Description
The specific DSCP value to configure
ip-rule (policy, policy-based routing, packet
show
dscp-table,
show
ip-rule,
show list
Possible
Default
Values
Value
0-63
sniffing), owner,
show