Show Contact-Closure - Avaya G250 Reference

CLI Commands
Parameters
Parameter
composite_operation_
index
User level
read-write
Context
ip access-control-list, ip access-control-list ip-rule, ip qos-list, ip qos-list ip-rule, ip qos-list
composite-operation
Example
To display information about composite-operation 13:
G350-001(QoS 440)# show composite-operation 13
Index Name
----- -------------------- --------- --------- ------------
13 HSPackets
Related commands
composite-operation, cookie, destination-ip,
dscp-table, icmp,
composite-operation,
tcp established,
policy-based routing, packet

show contact-closure

Use the show contact-closure command to view the status of a contact closure relay. If no
relay is specified, the status of all relays is displayed.
Syntax
show contact-closure [module/port:relay]
522 Avaya G250 and Avaya G350 CLI Reference
Description
The composite-operation to display
CoS
cos3
ip-rule (policy, policy-based routing, packet
show dscp-table,
tcp source-port, udp destination-port,
sniffing),
DSCP
1
dscp (policy, policy-based routing, packet
show ip-rule, show list, source-ip,
udp source-port, cos,
name
Possible
Values
0-19
Trust
No
sniffing), show
tcp destination-port,
dscp (policy,
Default
Value
sniffing),