Rtp-Stat Min-Stat-Win - Avaya G250 Reference

rtp-stat min-stat-win

Use the rtp-stat min-stat-win command to set the minimum statistic window for the RTP
statistics application. The minimum statistics window is the minimum number of observed RTP
sequence increments for which the application evaluates packet loss. Use the no form of this
command to reset the minimum statistic window to its default value.
The VoIP engine evaluates the current received packet loss every RTCP interval. The RTCP
interval is usually between 5 and 8 seconds. The VoIP engine postpones loss estimation to the
next interval if the number of received packets is less than the minimum statistic window.
Syntax
[no] rtp-stat min-stat-win packets
Parameters
Parameter
packets
User Level
read-write
Example
To set the minimum statistic window to 50:
G350-001(super)# rtp-stat min-stat-win 50
Related commands
rtp-stat clear, rtp-stat
rtp-stat service,
sessions, show rtp-stat
Description
The minimum number of observed RTP
sequence increments for which the
application evaluates packet loss
event-threshold,
rtp-stat threshold, show rtp-stat
summary, show rtp-stat thresholds
rtp-stat fault, rtp-stat qos-trap,
config, show rtp-stat
Alphabetical listing of CLI commands
Possible
Values
10-1000
rtp-stat qos-trap-rate-limit,
detailed, show rtp-stat
Issue 1.1 June 2005
Default
Value
379