Set Contact-Closure Pulse-Duration - Avaya G250 Reference

CLI Commands

set contact-closure pulse-duration

Use the set contact-closure pulse-duration command to set the pulse duration for a
contact closure relay. Pulse duration is the amount of time for the relay to return to normal after
the call controller triggers it.
Syntax
set contact-closure pulse-duration module/port:relay time
Parameters
Parameter
module
port
relay
time
User level
read-write
Context
general
Example
To set the pulse duration to 3 seconds for relay 2 of port 1 on module 10:
G350-001(super)# set contact-closure pulse-duration 10/1:2 3
Related commands
set contact-closure
396 Avaya G250 and Avaya G350 CLI Reference
Description
Module number of the contact closure port
Port number of the contact closure port
Relay number
Amount of time until the relay returns to
normal, in seconds
admin, show contact-closure
Possible Default
Values Value
10
1
1, 2
1-60