Avaya G250 Reference page 383

Syntax
rtp-stat threshold
{codec-loss|average-codec-loss|loss|average-loss|remote-loss|average-r
emote-loss} percentage
rtp-stat threshold {codec-rtt|rtt|jitter|remote-jitter} milliseconds
rtp-stat threshold echo-return-loss dbm
no rtp-stat threshold
{all|codec-loss|average-codec-loss|codec-rtt|echo-return-loss|loss|ave
rage-loss|remote-loss|average-remote-loss|rtt|jitter|remote-loss|echo-
return-loss}
Parameters
Parameter
codec-loss
average-codec-loss
loss
average-loss
remote-loss
average-remote-loss
percentage
Description
The percentage of time the codec plays
fill frames due to lack of valid RTP
frames. Possible causes include jitter
and packet loss.
The average codec loss measurement
since the beginning of the RTP stream.
The estimated network RTP packet
loss.
The VoIP engine evaluates the current
received packet loss every RTCP
interval — usually 5 to 8 seconds. The
VoIP engine postpones loss estimation
until the next interval if the number of
packets received is less than the
minimum statistic window. The
minimum statistic window is configured
with the CLI command rtp-stat
min-stat-win.
The average packet loss evaluation
since the beginning of the RTP stream.
The network loss according to the
remote RTP receiver. The device learns
of the remote packet loss from received
RTCP messages.
The average remote network loss
measurement since the beginning of
the RTP stream.
Alphabetical listing of CLI commands
Possible
Values
0.0-100.0
Issue 1.1 June 2005
Default
Value
383