CLI Commands
duplex
Use the duplex command to control the duplex setting for the current interface.
Note:
This command functions only in no autoneg mode.
Note:
Syntax
duplex {full|half}
Parameters
Parameter
full
half
User level
read-only
Context
Interface: FastEthernet (L2, L2-L3)
Example
To specify full duplex for the FastEthernet interface:
G350-001(super-if:FastEthernet 1.1)# duplex full
Related commands
autoneg,
shutdown
178 Avaya G250 and Avaya G350 CLI Reference
Description
Keyword indicating that the interface is set
to full duplex
Keyword indicating that the interface is set
to half duplex
(interface),
speed
(interface),
Possible
Values
traffic-shape rate
Default
Value