Rtp-Test-Port - Avaya G250 Reference

rtp-test-port

Use the rtp-test-port command to set the UDP port used by the CNA test plug to send an
RTP stream to another test plug in an RTP test. Use the no form of the command to return to
default UDP port for RTP tests.
Syntax
rtp-test-port port
no rtp-test-port
Parameters
Parameter
port
User level
read-write
Context
cna-testplug
Example
To set the RTP test port to 65120:
G350-003(cna-testplug 1)#
Related commands
clear counters (CNA test
scheduler, show cna
Description
The UDP port number to be used as the RTP test
port
rtp-test-port 65120
plugs), cna-testplug, cna-testplug-service, control-port, rtp-echo-port,
testplug, shutdown (CNA test
Alphabetical listing of CLI commands
Possible
Values
1-65535
plugs), test-rate-limit
Issue 1.1 June 2005
Default
Value
8887
385