Copy Startup-Config Scp - Avaya G250 Reference

CLI Commands
Related commands
copy ftp startup-config,
running-config
erase startup-config,
status, show logging file

copy startup-config scp

Use the copy startup-config scp command to upload the current configuration to a file
on an SCP server. The command prompts for the username and password. Uncommitted
changes to the configuration are not included.
Note:
After you change the configuration, run the copy running-config
Note:
startup-config command to save the changes. If you do not save the
changes, the device loses the changes when you reset it.
Syntax
copy startup-config scp filename ip
Parameters
Parameter
filename
ip
User level
read-write
Context
general
Example
To upload the current configuration to the router1.cfg file on the SCP server at IP address
192.168.49.10:
G350-001(super)# copy startup-config scp c:\config_files\router1.cfg
192.168.49.10
126 Avaya G250 and Avaya G350 CLI Reference
copy running-config
tftp, copy startup-config
nvram initialize,
condition, show
Description
Name of file to create on the SCP server
IP address of the SCP server
scp, copy running-config
scp, copy startup-config
show copy status, show download
running-config, show startup-config
startup-config, copy
tftp, copy tftp startup-config,
status, show erase
Possible Default
Values Value