Control-Port; Controller - Avaya G250 Reference

control-port

Use the control-port command to set the UDP port on which the CNA test plug listens for
test requests from schedulers. Use the no form of the command to return to default control port.
Syntax
control-port port
no control port
Parameters
Parameter
port
User level
read-write
Context
cna-testplug
Example
To set the control port to port number 12843:
G350-003(cna-testplug 1)#
Related commands
clear counters (CNA test
scheduler, show cna

controller

Use the controller command to enter configuration mode for a specific controller.
Syntax
controller {e1 | t1} module_number/port_number
Description
The UDP port number to be used as the control port
control-port 12843
plugs), cna-testplug, cna-testplug-service, rtp-echo-port, rtp-test-port,
testplug, shutdown (CNA test
Alphabetical listing of CLI commands
Possible
Values
1-65535
plugs), test-rate-limit
Issue 1.1 June 2005
Default
Value
8888
101