Rtp-Stat Clear - Avaya G250 Reference

Alphabetical listing of CLI commands
User level
read-write
Context
cna-testplug
Example
To set the RTP echo port to port 45230:
G350-001(cna-testplug 1)#
rtp-echo-port 45230
Related commands
clear counters (CNA test plugs), cna-testplug, cna-testplug-service, control-port, rtp-test-port,
scheduler, show cna testplug, shutdown (CNA test plugs), test-rate-limit

rtp-stat clear

Use the rtp-stat clear command to reset the RTP statistics application. When you reset
the application, all counters are reset and the RTP statistics history is erased.
Syntax
rtp-stat clear
User level
read-write
Context
General
Example
G350-001(super)# rtp-stat clear
Related commands
rtp-stat event-threshold, rtp-stat fault, rtp-stat min-stat-win, rtp-stat qos-trap, rtp-stat
qos-trap-rate-limit, rtp-stat service, rtp-stat threshold, show rtp-stat config, show rtp-stat
detailed, show rtp-stat sessions, show rtp-stat summary, show rtp-stat thresholds
Issue 1.1 June 2005 375