Copy Tftp Module - Avaya G250 Reference

CLI Commands

copy tftp module

Use the copy tftp module command to download a new version of module software into a
particular media module from a saved file, via TFTP.
To use this command, you need to have an active TFTP server, and to create a file into which to
download the software. If Avaya Network Manager is running, an additional TFTP server is not
required.
Note:
Perform the nvram initialize command prior to the copy tftp module
Note:
command.
Note:
This command is not supported by the G250.
Note:
Syntax
copy tftp module module_number filename ip
Parameters
Parameter
module_number
filename
ip
User level
read-write
Context
general
Example
To download the software file mm1.cfg for media module 5 from the TFTP server
192.168.49.10:
G350-001(super)# copy tftp module 5 c:\config\mm1.cfg 192.168.49.10
130 Avaya G250 and Avaya G350 CLI Reference
Description
The module number
The file name, including the full path
The IP address of the TFTP server
Possible Default
Values Value