Enhanced Security; Erase Phone-Image - Avaya G250 Reference

CLI Commands

enhanced security

Use the enhanced security command to activate enhanced-security mode which:
Disables the following management protocols on the internal emb-vlan interface:
TELNET, FTP, TFTP, SNMP
Inhibits output data traffic during powerup/error states
Inhibits modification of the active IPSEC transform-set parameters
In the G250 only: the G250 switches from performing symmetric encryption with a
hardware accelerator, to software-based encryption
Note:
This command can only be executed on FIPS-ready hardware.
Note:
Syntax
enhanced security
User level
Read-write
Context
general
Example
G350-001(super)# enhanced security
Related commands
show self-test-status,

erase phone-image

Use the erase phone-image command to delete phone-image A, B, C, D, E, or F.
Syntax
erase phone-imageA|phone-imageB|phone-imageC|phone-imageD|
phone-imageE|phone-imageF
User level
Read-write
184 Avaya G250 and Avaya G350 CLI Reference
show system, zeroize