Session - Avaya G250 Reference

CLI Commands

session

Use the session command to provide the means to establish a session with the active Media
Gateway Controller, SAT, or the device.
This is an alias to Telnet. The mgc option Telnets to the active Media Gateway Controller.
Note:
For session mgc sat, and session icc sat to access the Media Server
Note:
SAT terminal, the SAT port must be configured to 5023 on the Media Server. For
session mgc and session icc, the Media Server should allow access to the
Telnet port (23).
Syntax
session {mgc [sat] | icc [sat]}
Parameters
Parameter
mgc
icc
sat
User level
read-only
Context
general
Example
To establish a session with the active Media Gateway Controller:
G350-001(super)# session mgc
Related commands
clear mgc list,
icc-monitoring,
392 Avaya G250 and Avaya G350 CLI Reference
Description
Keyword for accessing the
LINUX shell login
Keyword for accessing the
S8300
Keyword for accessing the
SAT login
set icc-monitoring, set
show mediaserver, show
Possible Values
mediaserver, set mgc
mgc, show mgc list
Default Value
list, set reset-times, show