Save Config - Avaya G250 Reference

CLI Commands
User level
read-only
Context
general

save config

Use the save config command to write the SLS data set in a G250 to non-volatile RAM
(NVRAM).
Note:
This command is supported by the Avaya G250-Analog; it is not supported on the
Note:
G250-BRI or the G350.
Syntax
save config
User level
read-write
Context
You must be in the survivable-call-engine context before the save config command will work.
Example
G250-001(super-survivable-call-engine)# save config
Survivable-call-engine configuration is saved
Related commands
add trunk-group,
trunk-group, remove
set extension-password,
set trunk-group,
ip-codec-set, show
show trunk-group,
388 Avaya G250 and Avaya G350 CLI Reference
clear ars-fac, clear survivable-config,
trunk-group, set ars-fac,
set ip-codec-set,
show ars-fac, show date-format,
last-pim-update, show
survivable-call-engine
clear dial-pattern,
set date-format, set
set max-ip-registrations,
show dial-pattern,
max-ip-registrations, show
clear extension,
dial-pattern, set extension,
set survivable-call-engine,
show extension, show
survivable-call-engine,
clear