Set Spantree Tx-Hold-Count - Avaya G250 Reference

set spantree tx-hold-count

Use the set spantree tx-hold-count command to set the value in packets used by the
spanning tree in order to limit the maximum number of BPDU's transmitted during a hello-time
period.
Note:
This command is not supported by the G250.
Note:
Syntax
set spantree tx-hold-count rate
Parameters
Parameter
rate
User level
read-write
Context
general
Example
To limit the number of hello packets to 2:
G350-001(super)# set spantree tx-hold-count 2
tx hold count is set to 2.
Related commands
set port spantree,
spantree priority,
forward-delay,
version, show spantree
Description
Recommended value is 3
set port spantree cost,
set spantree default-path-cost,
set spantree hello-time,
Alphabetical listing of CLI commands
Possible Values
1-10
set port spantree force-protocol-migration,
set spantree
set spantree max-age,
Default Value
enable/disable, set spantree
set spantree priority, set spantree
Issue 1.1 June 2005
set port
495