Snmp-Server Dynamic-Trap-Manager - Avaya G250 Reference

snmp-server dynamic-trap-manager

Use the snmp-server dynamic-trap-manager command to modify the SNMP settings of
the dynamic trap manager. Use the no form of the command to restore the dynamic trap
manager to its default settings, and remove all notification type filters.
Syntax
snmp-server dynamic-trap-manager {traps|informs} {v1|v2c community}
[udp-port port] [notification_type_list]
no snmp-server dynamic-trap-manager notification_type_list
Parameters
Parameter
traps
informs
v1
v2c
community
port
notification_
type_list
User Level
admin
Context
general
Description
Specifies that the dynamic trap manager sends
messages without requesting acknowledgement.
This is the default.
Specifies that the dynamic trap manager sends
messages requiring acknowledgement.
Specifies that the dynamic trap manager uses
SNMP v1 functionality. This is the default.
Specifies that the dynamic trap manager uses
SNMP v2c functionality.
The community string for accessing SNMP
services.
The udp port of the SNMP host.
The specific types of messages that the dynamic
trap manager sends. Use this list to filter the
messages controlled by the dynamic trap
manager.
Alphabetical listing of CLI commands
Possible
Values
Issue 1.1 June 2005
Default
Value
all
739