Zeroize - Avaya G250 Reference

Alphabetical listing of CLI commands

zeroize

Use the zeroize command to clear all secret parameters and initialize the NVRAM to its
factory defaults.
!
CAUTION:
This command restores factory defaults and disconnects the current session.
CAUTION:
Syntax
zeroize
User level
admin
Context
general
Example
To clear all secret parameters and initialize the NVRAM to its factory defaults:
G350-001(super)# zeroize
This command will restore factory defaults, and disconnect your
existing session.
*** Zeroize *** - do you want to continue (Y/N)? Y
Related commands
enhanced security, show self-test-status, show system
Issue 1.1 June 2005 799