CLI Commands
router vrrp
Use the router vrrp command to enable VRRP routing globally. Use the no form of this
command to disable VRRP routing.
Note:
You cannot activate both VRRP and SRRP protocols at the same time.
Note:
Syntax
[no] router vrrp
User level
read-write
Context
general
Related commands
ip
vrrp,
ip vrrp
primary,
ip vrrp
rtp-echo-port
Use the rtp-echo-port command to set the UDP port used by the CNA test plug to listen for
RTP streams send by other test plugs running RTP tests. Use the no form of the command to
return the RTP echo port to its default.
Syntax
rtp-echo-port port
Parameters
Parameter
port
374 Avaya G250 and Avaya G350 CLI Reference
address,
ip vrrp
auth-key,
priority,
ip vrrp
timer,
Description
The UDP port number to be used as the RTP echo
port number
ip vrrp override addr
show ip vrrp
owner,
ip vrrp
preempt,
Possible
Values
1-65535
ip vrrp
Default
Value
8888