CLI Commands
ip dhcp-server
By default, DHCP server is inactive. Use the dhcp-server command to activate the DHCP
server on the G350. Use the no form of this command to deactivate the DHCP server.
Syntax
[no] ip dhcp-server
User level
read-write
Context
general
Example
To enable DHCP server:
G350-001(super)# ip dhcp-server
To disable DHCP server:
G350-001(super)# no ip dhcp-server
Related commands
clear ip dhcp-server
packets,
ip dhcp ping
show ip dhcp-server statistics
ip directed-broadcast
Use the ip directed-broadcast command to enable net-directed broadcast forwarding.
Use the no form of this command to disable net-directed broadcasts on an interface.
Syntax
[no] ip directed-broadcast
User level
read-write
240 Avaya G250 and Avaya G350 CLI Reference
binding,
clear ip dhcp server
timeout,
ip dhcp
pool,
statistics,
ip dhcp activate
show ip
dhcp-pool,
show ip dhcp-server
pool,
ip dhcp ping
bindings,