Set Port Spantree Priority - Avaya G250 Reference

Related commands
set port spantree,
default-path-cost,
hello-time, set spantree
version, show spantree

set port spantree priority

Use the set port spantree priority command to set the Spanning Tree priority level of
a port. This value defines the priority of a port to be blocked in case two ports with the same
cost cause a loop.
Note:
This command is not supported by the G250.
Note:
Syntax
set port spantree priority module/port value
Parameters
Parameter
module
port
value
User level
read-write
Context
general
Example
To set the priority for port 4 of module 3 to 128:
G350-147# set port spantree priority 3/4 128
port 3/4 spantree priority is 128
set port spantree cost,
set spantree enable/disable,
max-age, set spantree
Description
The module number
The port number
Number representing the priority of the
port. 0 is the highest priority. A port with a
lower priority will be blocked.
Alphabetical listing of CLI commands
set port spantree priority,
set spantree forward-delay,
priority, set spantree
set spantree
set spantree
tx-hold-count, set spantree
Possible Default
Values Value
0-240 (in 128
multiples
of 16)
Issue 1.1 June 2005 463