Nvram Initialize - Avaya G250 Reference

Alphabetical listing of CLI commands
Example
G350-001(super)# nslookup www.avaya.com
DNS server : 135.64.19.81
Host name : pcmsnj.avaya.com
IP address : 216.74.135.14
Host alias : www.avaya.com
pcms.avaya.com
Related commands
clear ip domain statistics, ip domain list, ip domain lookup, ip domain name-server-list, ip
domain retry, ip domain timeout, show ip domain, show ip domain statistics

nvram initialize

Use the nvram initialize command to reset the NVRAM parameters to the factory default
values. This command is an alias for erase startup-config (refer to erase
startup-config on page 185).
Syntax
nvram initialize
User level
read-write
Context
general
Example
To reset the configuration parameters for the device:
G350-001(super)# nvram initialize
This command will restore factory defaults, and can disconnect your
telnet session
*** Reset *** - do you want to continue (Y/N)? Y
Connection closed by foreign host.
Issue 1.1 June 2005 339