Crypto Ipsec Transform-Set - Avaya G250 Reference

Context
general
Example
G350-001(super)# no crypto ipsec nat-transparency udp-encapsulation
Related commands
crypto isakmp nat

crypto ipsec transform-set

Use the crypto ipsec transform-set command to enter the IKE phase 2 (IPSec)
transform-set context and create or edit IPSec parameters for the VPN tunnel. Use the no form
of the command to delete IKE phase 2 (IPSec) parameters for the VPN tunnel.
Syntax
[no] crypto ipsec transform-set name
{esp-des | esp-3des | esp-aes | esp-aes-192 | esp-aes-256 | esp-null}
[{esp-md5-hmac | esp-sha-hmac}] [comp-lzs]
Note:
If you want to enable authentication only, you must enter the esp-null
Note:
parameter.
Parameters
Parameter
name
esp-des
esp-3des
esp-aes
esp-aes-192
keepalive, ip crypto-group
Description
The transform-set name
Encryption type: Encapsulation Security
Protocol and Data Encryption Standard
Encryption type: Encapsulation Security
Protocol and Triple Data Encryption
Standard
Encryption type: Encapsulation Security
Protocol and Advanced Encryption
Standard using a 128-bit key
Encryption type: Encapsulation Security
Protocol and Advanced Encryption
Standard using a 192-bit key
Alphabetical listing of CLI commands
Possible Values
1-32 characters,
no spaces
Issue 1.1 June 2005
Default
Value
139