Ip Ospf Authentication-Key - Avaya G250 Reference

CLI Commands

ip ospf authentication-key

Use the ip ospf authentication-key command to configure the interface authentication
password. Use the no form of this command to remove the OSPF password.
Syntax
ip ospf authentication-key key
no ip ospf authentication-key
Parameters
Parameter
key
User level
read-write
Context
Interface: Serial (DS1 PPP L2-L3, DS1 PPP L3, DS1 FR-SUB L2-L3, DS1 FR-SUB L3,
USP PPP L2-L3, USP PPP L3), FastEthernet (L2-L3, L3), VLAN (L2-L3, L3), Loopback (L2-L3,
L3), Tunnel (L3, L2-L3)
Example
To set the authentication password for the VLAN 1 interface as "my_pass":
G350-001(if:Vlan 1)# ip ospf authentication-key my_pass
Related commands
ip ospf authentication,
message-digest-key,
ospf, show ip ospf,
ip protocols
258 Avaya G250 and Avaya G350 CLI Reference
Description
The interface authentication password
ip ospf cost, ip ospf
ip ospf network point-to-multipoint,
show ip ospf database,
dead-interval, ip ospf
ip ospf priority,
show ip ospf interface,
Possible Default
Values Value
string
(1-8 chars)
hello-interval, ip ospf
ip ospf router-id,
show ip ospf neighbor,
router
show