Encapsulation Pppoe - Avaya G250 Reference

Related commands - Frame relay encapsulation
frame-relay interface-dlci,
lmi-n393dte, frame-relay
address
Related commands - PPP encapsulation
ip address, keepalive

encapsulation pppoe

Use the pppoe command to enable the PPPoE client. Use the no form of the command to
return to disable the PPPoE client.
Note:
The encapsulation pppoe command fails if:
Note:
1. 'ip address' is configured on the interface
2. The interface is part of a backup scheme
3. Dynamic CAC is configured on the interface
Syntax
encapsulation pppoe
no encapsulation
Parameters
Parameter
pppoe
User level
read-write
Context
Interface: Fast Ethernet
frame-relay lmi-n391dte,
lmi-type, frame-relay
(PPP), ppp timeout ncp,
Description
Keyword indicating that the encapsulation
be set to PPP Power Over Ethernet.
Alphabetical listing of CLI commands
frame-relay lmi-n392dte,
priority-dlci-group, frame-relay
ppp timeout retry, show interfaces
frame-relay
traffic-shaping,
Possible Default
Values Value
Issue 1.1 June 2005
ip
181