Set Peer (Crypto Map) - Avaya G250 Reference

set peer (crypto map)

Use the set peer command to attach a peer to a crypto map. Use the no form of the
command to remove the peer from the crypto map.
Note:
You can only change the peer of a crypto map when the map is inactive.
Note:
Note:
The set peer and set peer-group commands are mutually exclusive. You
Note:
can attach to a given crypto map either a peer or a peer-group, not both.
Syntax
set peer {ip-address | hostname}
no set peer
Parameters
Parameter
ip-address
hostname
User level
read-write
Context
crypto map
Examples
G350-001(config-crypto:1)# set peer 149.49.52.135
Related commands
continuous-channel,
peer-group, show crypto map
Description
The remote peer IP address
The remote peer hostname
crypto map, description (crypto
Alphabetical listing of CLI commands
Possible
Values
map), set transform-set,
Issue 1.1 June 2005
Default
Value
set dscp, set
429