Tunnel Dscp - Avaya G250 Reference

tunnel dscp

By default, the GRE header copies the DSCP value from the header of the original packet. Use
the tunnel dscp command to override the original packet's DSCP with the specified DSCP
value. Use the no form of the command to use the DSCP value of the original packet.
Syntax
tunnel dscp dscp
no tunnel dscp
Parameters
Parameter
dscp
User level
read-write
Context
Interface: Tunnel (L2, L2-L3)
Example
G350-001(super)# tunnel dscp 0
Related commands
interface FastEthernet,
Description
The DSCP value to be used instead of the
DSCP from the header of the original packet
interface tunnel, tunnel mode
Alphabetical listing of CLI commands
Possible Default
Values Value
0-63
Issue 1.1 June 2005 783