Keepalive-Icmp Failure-Retries - Avaya G250 Reference

Related commands
keepalive-icmp
keepalive-icmp

keepalive-icmp failure-retries

Use the keepalive-icmp failure-retries command to set the number of consecutive
failed keepalive packets necessary to set the interface's keepalive status as down. Using this
command without a parameter resets the failure-retry value to the default value.
Syntax
keepalive-icmp failure-retries failure-retries-number
Parameters
Parameter
failure-
retries-
number
User level
read-write
Context
Interface: FastEthernet
Example
G350-001(if:FastEthernet 10/2)# keepalive-icmp failure-retries 3
Related commands
keepalive-icmp,
success-retries,
failure-retries, keepalive-icmp
success-retries, keepalive-icmp
Description
The number of failed keepalive packets
required
keepalive-icmp interval,
keepalive-icmp timeout,
Alphabetical listing of CLI commands
interval, keepalive-icmp
timeout, show keepalive-icmp
keepalive-icmp source-address,
show keepalive-icmp
source-address,
Possible Default
Values Value
1-32 4
keepalive-icmp
Issue 1.1 June 2005 309