Show Upload Dhcp-Binding-File Status - Avaya G250 Reference

CLI Commands
Related commands
add trunk-group,
trunk-group, remove
extension, set
survivable-call-engine,
show extension,
survivable-call-engine,

show upload dhcp-binding-file status

Use the show upload dhcp-binding-file status command to display the upload status
of a DHCP binding file.
Syntax
show upload dhcp-binding-file status
User level
read only
Context
general
Example
If no download was done:
G350-001(super)# show upload dhcp-binding-file status
Module #10
===========
No dest file for download operation - no download operation was done.
If download was done:
G350-001(super)# show upload dhcp-binding-file status
Module #10
===========
Module : 10
Source file : dhcp-binding
Destination file : bbbb
Host : 135.64.102.64
Running state : Idle
Failure display : (null)
Last warning : No-warning
726 Avaya G250 and Avaya G350 CLI Reference
clear ars-fac, clear
trunk-group, save
extension-password, set
set trunk-group,
show ip-codec-set,
survivable-call-engine
survivable-config, clear
config, set ars-fac,
ip-codec-set, set max-ip-registrations,
show ars-fac, show
show last-pim-update,
dial-pattern, clear extension,
set date-format, set dial-pattern,
set
date-format, show dial-pattern,
show max-ip-registrations,
clear
set
show